All Training Materials
製品名で検索する
  • Training Materials
  • Type

OptiStruct Optimization v2021

The purpose of this self paced course is to cover the basics of OptiStruct Optimization. The course contains modules introducing the basic optimization types and giving an over of each. Many exercises are available in the modules that use the See It, Try It methodology. See It allows you to watch a video demonstration of the exercise covered in the section, while Try It gives you a pdf and model to try it in the software on your own.

eLearning

Altair Simsolid - EDEM Workflow

Workflow using Altair SimSolid and EDEM to show particle flow of a transfer chute deflector plate.

Tutorials

Strain-life Fatigue with Altair SimSolid

Altair SimSolid has added low-cycle, Strain-life fatigue to its functionality in 2021. In this video, learn how to setup a model for EN fatigue analysis and review the simulation results.

Tutorials

Stress Linearization with Altair SimSolid

Learn how to calculate linearized stress components after structural analysis in Altair SimSolid.

Tutorials

Altair SimSolid - Batchmode Execution

In this short tutorial, you'll learn how to use in Altair SimSolid in batchmode.

Tutorials

Altair SimSolid - Connection Resolution

In this short tutorial, you'll learn how to edit connections in Altair SimSolid.

Tutorials

Altair SimSolid - Bookmark Browser

In this short tutorial, you'll learn how to use bookmark browser in Altair SimSolid.

Tutorials

Altair SimSolid - Design Studies

In this short tutorial, you'll learn how to work with multiple design studies in Altair SimSolid.

Tutorials

EDEM API Tutorial: Variable Cohesion

This tutorial describes how to create a new cohesion contact model, based on an existing contact model supplied with EDEM. The cohesion model is modified to include time-dependent particle-to-particle and particle-to-geometry cohesion. The main focus is on: Editing the physics of the Linear Cohesion model on both CPU and GPU Compiling and loading a Custom Contact Model Post-Processing the model to investigate variable cohesion

Tutorials

A Basic RCS Demo with Feko

This short demo will show how to create, set up and run a model for RCS simulation. Following the simulation, the demo will then take you to visualization and analysis of the results. You will also learn how to benefit from the scripting capabilities to visualize and understand more advanced characteristics of the model, which are not evident by doing a simple analysis of the object. You will have access to the entire workflow, including simulation, in a 5 minutes video.

Tutorials

HyperWorks for Aerospace v2021

In this course you will have the opportunity to learn about the tools available in HyperWorks for aerospace workflows. Modules contained within the course provide detailed descriptions of the tools and workflows for use in the aerospace industry. You will also have the opportunity to watch demonstrations and perform hands on exercises throughout the modules.

eLearning

Complex Radome Simulation Training Cases

Complex radomes have long and costly development cycles, where simulation can significantly reduce such time and cost. newFASANT technology extends Altair Feko high frequency solution coverage for complex radomes, including FSS. A bit more in detail, this solution can accelerate modelling and simulation time by 50X for antenna and RCS problems. Radome modelling including FSS can be reduced from weeks to days, while MoM/MLFMM is parallelized with MPI/OpenMP, including optimization capabilities. This document contents 2 training examples. The first one is on parametric radomes and the second one on radomes with FSS.

Training Materials

Introductory Tutorial Video for MCalibration by PolymerFEM

See how to use MCalibration to quickly calibrate almost any material model, including viscoplastics material models. This tutorial is suitable for beginners that have not used the MCalibration software before.

Tutorials

Collocation Interference - Tutorial Package

Learning package to learn through a set of hands-on exercises how to analyze and solve co-site interference and interferences problems with the Altair solution.

Training Materials

The Digital Approach to Industrial Machinery Design

The need to design more complex industrial machinery on shorter timelines means that companies ask engineers to do more with far less. Chad Jackson, CEO of Lifecycle Insights, describes the digital approach to industrial machinery design and explains strategies leveraging Simulation, Data Science and High-Performance Computing. He shows how companies creating equipment that increases cycle speed and improves yields in this technical report. The E-Book covers the following topics: - THE DEVELOPMENT CHALLENGE OF INDUSTRIAL MACHINERY - ADDRESSING STRUCTURAL STRESS AND STIFFNESS - ARCHITECTING AND VALIDATING SYSTEMS DESIGN - SELECTING THE RIGHT ACTUATION COMPONENTS - MITIGATING VIBRATION AND EXCITATION - PLANNING AND VALIDATING CONTROLS DESIGN - STREAMLINING COMMISSIONING - MONITORING THROUGH FIELD DATA - RECAP AND CONCLUSIONS

eBooks

HyperWorks 2021

In this course you will have the opportunity to learn about HyperWorks. Modules contained within the course provide detailed descriptions of the tools and workflows within HyperWorks. You will also have the opportunity to watch demonstrations and perform hands on exercises throughout the modules.

eLearning

OptiStruct for Linear Analysis v2021

The purpose of this self paced course is to cover the basic topics for OptiStruct Linear Analysis. The Setup sections will use the See It, Do It methodology to cover the concepts. See It allows you to watch a video demonstration of the exercise covered in the section.

eLearning

HyperWorks CFD v2021

In this course you will have the opportunity to learn about HyperWorks CFD. Modules contained within the course provide detailed descriptions of the tools and workflows within HyperWorks CFD. You will also have the opportunity to watch demonstrations and perform hands on exercises throughout the modules.

eLearning

HyperMesh Quickstart v2021

The purpose of this self paced course is to introduce HyperMesh to new users of the software. Most sections will use the See It, Do It methodology to cover the concepts. See It allows you to watch a video demonstration of the exercise covered in the section. Do It consists of a written exercise and model that can be opened in HyperMesh which allows you to perform the exercise on your own. Some sections will also contain interactive guides to provide a detailed description of the different options contained within a panel or browser.

eLearning

Motionview/MotionSolve Introduction v2020

In this course, you will have the opportunity to learn about the tools and processes available for multi-body dynamics using MotionView and MotionSolve. Modules contained within the course provide detailed descriptions of the tools and workflows within MotionView to setup and run MotionSolve analyses. You will also have the opportunity to watch and perform hands-on exercises within modules.

eLearning

Radioss Introduction v2020

In this course, you will have the opportunity to learn about the Radioss solver and the tools and processes available for running analyses with Radioss. Modules contained within the course provide detailed descriptions of the tools and workflows for using the Radioss solver. You will also have the opportunity to watch and perform hands-on exercises within each module.

eLearning

HyperLife 2020

In this course, you will have the opportunity to learn about HyperLife and the tools and processes available for fatigue analysis. Modules contained within the course provide detailed descriptions of the tools and workflows within HyperLife. You will also have the opportunity to watch and perform hands-on exercises within each module.

eLearning

Signal Processing with Altair Compose

Signal processing - a signal describing the evolution of a phenomenon and its field of study - is a very effective way to extract useful information from sensors that cannot be measured, improve transmission, storage efficiency, and signal quality. In this e-book we'll describe how signal processing Altair Compose, an all-in-one math tool that provides various functions across different domains, can be used for signal processing in a wide range of applications.

eBooks

Inspire Mold 2020 Introduction

In this course, you will have the opportunity to learn about the Inspire Mold 2020 interface along with tools and workflows contained within Inspire Mold. Modules contained within the course provide detailed descriptions of the tools and workflows within Inspire Mold. You will also have the opportunity to watch and perform hands-on exercises within each module.

eLearning

Activate for Systems Simulation and Controls

In this course you will find several topics covering Systems Simulations and Controls. The topics are broken into modules detailing each step of the process.

eLearning

Antenna Coupling on an Electrically Large Object

Calculate the S-parameters (coupling) over a frequency range for three monopole antennas located near the front, middle and rear of a Rooivalk helicopter mock-up.

Tutorials

Activate for Hydraulic Simulation

In this course you will find 4 modules to help you learn how to use Altair Activate for Hydraulic Simulation.

eLearning

OptiStruct Optimization 2020

The purpose of this self paced course is to cover the basics of OptiStruct Optimization. The course contains modules introducing the basic optimization types and giving an over of each. Many exercises are available in the modules that use the See It, Try It methodology. See It allows you to watch a video demonstration of the exercise covered in the section, while Try It gives you a pdf and model to try it in the software on your own.

eLearning

Inspire Introduction 2020

In this course, you will have the opportunity to learn about the Inspire 2020 interface along with tools and workflows contained within Inspire. Modules contained within the course provide detailed descriptions of the tools and workflows within Inspire. You will also have the opportunity to watch and perform hands-on exercises within each module.

eLearning

Altair SimSolid - ERP with Constant Loading Tutorial

Learn how to perform a dynamic frequency response analysis and evaluate the equivalent radiated power (ERP) with Constant Loading in Altair SimSolid.

Tutorials

Altair SimSolid - Hydrostatic Pressure Tutorial

Learn how to simulate an hydrostatic pressure in Altair SimSolid.

Tutorials

Altair SimSolid - Random Response Analysis Tutorial

Learn how to perform a random response analysis in Altair SimSolid.

Tutorials

Altair SimSolid - Thermo-structural Coupling Tutorial

Learn how to perform thermo-structural coupling analyses in Altair SimSolid.

Tutorials

Altair Inspire Studio - Manufacturing Drawings

The latest release of Altair Inspire Studio introduces a powerful set of capabilities to create detailed 2D drawings of complex 3D models and assemblies from multiple perspectives. Functionalities include one-click view creation, section and detail views, linear, angular, radial, and ordinate dimensions, as well as annotations. Once completed, drawings can be easily exported and printed.

Tutorials

Altair Inspire Studio - Design Tables

The latest release of Altair Inspire Studio introduces a new, quick, and easy way to explore design variations. Create design iterations on the fly using a design table. Quickly modify and set thresholds for the various parameters of a model, without having to dig through construction history. The entire model, including the design variables, can be exported to Altair HyperStudy to explore and evaluate different design alternatives.

Tutorials

Compose NVH

In this course you will find 6 modules to help you learn how to use Altair Compose for NVH.

eLearning

HyperWorks 2020

In this course you will have the opportunity to learn about HyperWorks. Modules contained within the course provide detailed descriptions of the tools and workflows within HyperWorks. You will also have the opportunity to watch demonstrations and perform hands on exercises throughout the modules. A login to Altair One is required to access this course.

eLearning

HyperWorks CFD v2020

In this course you will have the opportunity to learn about HyperWorks CFD. Modules contained within the course provide detailed descriptions of the tools and workflows within HyperWorks CFD. You will also have the opportunity to watch demonstrations and perform hands on exercises throughout the modules. A login to Altair One is required to access this course.

eLearning

Compose Signal Processing

In this course you will find 12 modules to help you learn how to use Altair Compose for Signal Processing.

eLearning

Altair SimSolid - Adhesives Tutorial

Learn how to creates adhesives in Altair SimSold.

Tutorials

Altair SimSolid - Apply Bolt Pretension

Learn how to perform static analysis by applying bolt pretension in Altair SimSolid.

Tutorials

Altair SimSolid - Bushings Tutorial

Learn how to create bushings in Altair SimSolid.

Tutorials

Altair SimSolid - Post-processing with Datum Points

Learn how to post-process using datum points in Altair SimSolid.

Tutorials

Altair SimSolid - Distributed Mass Tutorials

Learn how to create distributed mass in Altair SimSolid.

Tutorials

Altair SimSolid - Joints Tutorial

Learn how to create joints in Altair SimSolid.

Tutorials

Altair SimSolid - Linear Superposition

Learn how to create superposition subcase in Altair SimSolid.

Tutorials

Altair SimSolid - Liquid Body Tutorial

Learn how to create liquid mass in Altair SimSolid.

Tutorials

Altair SimSolid - Modal Analysis

Learn how to perform modal analysis in Altair SimSolid.

Tutorials
1 2 3 4 Next
Have a Question? If you need assistance beyond what is provided above, please contact us.
Loading...